Freedom60^®

Syringe Infusion Pump

Easy-to-Use, Portable Pump for Large Dose or Recurring Infusions at Home.

Easy to use and completely portable, the Freedom60^® infusion pump is ideal for subcutaneous immune globulin infusions at home. Give patients the freedom of convenience without compromise.

For larger volume (>30 mL) infusions
Ergonomic and simple
Simple controls – wind, load, and go.
Compatible with BD® 50 mL syringes, Medline 60 mL syringes, and HIZENTRA® 50 mL Prefilled Syringes
Indicated for immunoglobulins and antibiotics¹

More than just a single pump, we offer a complete Freedom™ Infusion System. For small volume infusions (<30 mL), choose FreedomEDGE^® Syringe Infusion Pump.

Christina's Story

“I absolutely love the Freedom60 pump – it’s super easy to use and it comes with a pouch so you can take it with you and move around! Also, love the High-Flo sub-q needle sets – less pain with insertion and they come with brand name Tegaderm! Thank you for the awesome products!”

Christina B.

The Freedom60^® is Indicated for a Wide Range of Immunoglobulins and Antibiotics.

Immunoglobulins*¹

CUTAQUIG^®, Immune Globulin Subcutaneous (Human) 16.5% Solution (manufactured by Octapharma®)
CUVITRU^®, Immune Globulin Infusion (Human) 20% (manufactured by Takeda®)
GAMMAGARD LIQUID®, Immune Globulin Infusion (Human) 10% (manufactured by Takeda®) – US only
HIZENTRA^®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by CSL Behring®)
HIZENTRA^®, single-use 50 mL prefilled syringe (only when used with the Freedom60® Prefilled Syringe Adapter)
XEMBIFY^®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by Grifols®)
Gammanorm^® (Human Normal Immunoglobulin, 165 mg/mL Solution) – outside US only
HYQVIA^® [Immune Globulin Infusion 10% (Human) with Recombinant Human Hyaluronidase] –
outside US only (only when used with the Precision™ Flow Rate Controller)

* Please note: The Freedom60® is specifically indicated for the subcutaneous infusion in the home, hospital, or ambulatory settings when administered according to the approved biologic.

Antibiotics^†1

Ertapenem
Meropenem
Oxacillin
Tobramycin

^† The Freedom™ Infusion System with the Freedom60® Syringe Infusion Driver and Precision™ Flow Rate Tubing, is specifically indicated for the intravenous infusion of these antibiotics when used according to the approved drug product labeling.

Additional indication outside the US: subcutaneous hydration with electrolyte solutions (±15%).

Benefits of the Freedom60^® Infusion System

Highest Quality

Made in the USA with high quality materials in ISO 13485 facility.

Designed With Safety in Mind

Designed using state of the art standards for drug delivery medical devices.

Portable

No batteries or electricity needed. Comes with a travel pouch to promote patient independence.

DynEQ™ (Dynamic Equilibrium)

Dynamic response – if the pressure increases at the infusion site, the system immediately slows down.

Rugged

Robust design with a molded ABS plastic housing. No sensitive electric parts.

Easy to Handle

Fits syringes smoothly.

Simple Controls

Easy to use recessed ON/OFF switch.

Large Knob, Cannot be Overwound

Dexterity friendly.

Syringe Held Securely during Infusion

Spring-loaded holder locks syringe into the pump and maintains proper syringe orientation.

Syringe Protection

Syringe is secure during infusions.

How to Use Freedom60^®

Freedom60^® Instruction Videos

Freedom60^® Instructions for Use (IFUs)

Freedom™ Infusion System Brochure

Freedom60^® Product Numbers

F10050 Freedom60® Syringe Infusion Pump with Travel Pouch

F10090 Replacement Travel Pouch – black

F10080 Zebra Print Travel Pouch – pattern

Freedom60^® Frequently Asked Questions (FAQs)

Is my Freedom60^® working? How can I tell if I am infusing?

First, verify that your tubing is the right flow rate. Then, check that the pump winds properly and makes a noise when turned on – this means the pump is working properly. Finally, note the time the infusion starts and watch that the syringe plunger moves in accordance with your estimated infusion time. If there is any doubt, please talk to your healthcare provider.

How can I find my best infusion sites?

Always refer to the medicine’s prescribing information and recommendations from your healthcare provider for infusion site locations. If you are experiencing site reactions or discomfort talk to your healthcare provider. If you are experiencing slow infusions, you can time your infusion to see how well your body accepts the drug. Talk to your healthcare provider about switching infusion sites or adjusting your needles or tubing to better suit your needs. For more details, please refer to the Instructions for Use.

How do I clean the Freedom60^®?

Refer to the Instructions for Use for detailed instructions.

What if I want to administer a larger or smaller amount of fluid than 50 mL?

If a dose is larger than the syringe size that you have, you can divide the dose into additional syringes using the same tubing and needle set. Follow the instructions in the Freedom60® IFU (and your healthcare provider’s protocol) for using multiple syringes. For smaller volumes, simply fill the syringe to the desired amount. You can also try the FreedomEDGE®, which accommodates 20 or 30 mL syringes.

What applications can the Freedom60^® be used for?

The Freedom60® Syringe Infusion System is indicated for the subcutaneous infusion of the following human plasma-derived immunoglobulins when used according to the FDA approved biologic labeling: Cutaquig®, Immune Globulin Subcutaneous (Human) 16.5% Solution (manufactured by Octapharma®); Cuvitru®, Immune Globulin Infusion (Human) 20% (manufactured by Takeda®); Gammagard Liquid®, Immune Globulin Infusion (Human) 10% (manufactured by Takeda®); Hizentra®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by CSL Behring®); and Xembify®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by Grifols®) in the home, hospital, or ambulatory settings when administered according to the approved biologic or drug product labeling.

The Freedom60® Syringe Driver and Precision™ Flow Rate Tubing is also indicated for the intravenous infusion of the following antibiotics when used according to the FDA approved drug product labeling: ertapenem, meropenem, oxacillin, and tobramycin.

What if I want my infusion to go faster?

Speak with your healthcare provider to learn more about all the Precision Flow Rate Tubing™ choices available, and to see if a change is appropriate.

Does the Freedom60® need maintenance?

The Freedom60^® is designed to operate without scheduled maintenance. If you ever experience a pump problem, immediately advise your healthcare provider who can arrange for a replacement if necessary.

How do I get a carrying bag for the pump?

Please contact the provider who sent you your pump.

1. K231918 – 510(k) Premarket Notification for Freedom60 Infusion System