FreedomEDGE®

Syringe Infusion Pump

A Compact Infusion Solution for Smaller Doses.

The FreedomEDGE® infusion pump is designed for easy subcutaneous infusions at home. It gives patients the freedom to embrace life and administer their treatments with ease.

  • For smaller volume (<30 mL) and recurrent infusions
  • Compact and portable
  • Easy to use – load, close, and go.
  • Compatible with BD® 20/30 mL syringes and Hizentra® 20 mL Prefilled Syringes
  • Indicated for immunoglobulins and antibiotics1
 

More than just a single pump, we offer a complete Freedom™ Infusion System. For large volume infusions (>30 mL), choose Freedom60® Syringe Infusion Pump.

Gregg's Story

“Your products make the infusion as pleasant an experience as possible. The Freedom pump is so simple to use, you can’t mess it up. Thanks!”

Gregg C.

The FreedomEDGE® is Indicated for a Wide Range of Immunoglobulins, Drugs and Antibiotics.

Immunoglobulins and drugs*1

  • Cuvitru® Immune Globulin Infusion (Human) 20% (manufactured by Takeda®) 
  • Gammagard Liquid®, Immune Globulin Infusion (Human) 10% (manufactured by Takeda®) – US only 
  • Hizentra®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by CSL Behring®) 
  • Hizentra® single-use 20 mL prefilled syringe 
  • Empaveli® (pegcetacoplan) injection, 1080 mg/20 mL solution (manufactured by Apellis) 
  • Gammanorm® (Human Normal Immunoglobulin, 165 mg/mL Solution) – outside US only 
  • HyQvia® [Immune Globulin Infusion 10% (Human) with Recombinant Human Hyaluronidase] – outside US only (only when used with the Precision™ Flow Rate Controller) 

* Please note: The FreedomEDGE® is specifically indicated for the subcutaneous infusion in the home, hospital, or ambulatory settings when administered according to the approved biologic.

Antibiotics†1

  • Ertapenem
  • Meropenem
  • Oxacillin
  • Tobramycin
The Freedom™ Infusion System with the FreedomEDGE® Syringe Driver and Precision™ Flow Rate Tubing, is specifically indicated for the intravenous infusion of these antibiotics when used according to the approved drug product labeling.

Benefits of the FreedomEDGE® Infusion System

The Freedom™ Infusion System has an easy to use, ergonomic design that comes with the quality and safety of Koru Medical Systems best-in-class standards. Each device carries the Koru promise.

High Quality​

Made in the USA with high quality materials in ISO 13485 facility.

Safe Drug Delivery

Designed with safety in mind.

DynEQ™ (Dynamic Equilibrium)

Dynamic response – if the pressure increases at the infusion site, the system immediately slows down.

Portable

No batteries or electricity needed. Comes with a travel pouch to promote patient independence.

Rugged

Designed with durable parts.

Easy to Handle

Fits syringes smoothly.

Check Progress Easily

Clear window to view syringe during infusions.

Works Silently

No unnecessary alarms or noises.

Made for All Users

Small and easy to use.

Syringe Held Securely during Infusion

Spring-loaded holder locks syringe into the pump and maintains proper syringe orientation.

Syringe Protection

Syringe is secure during infusions.

Additional Benefits of the FreedomEDGE®

Smaller Volume Syringes

Ideal for small dose infusions.

Simple Syringe Loading

Close lid and begin infusion.

Easy to Use

No dials or controls.
Just load, close, and go.

How to Use FreedomEDGE®

FreedomEDGE® Instruction Videos

FreedomEDGE® Instructions for Use (IFUs)

Freedom™ Infusion System Brochure

FreedomEDGE® Product Numbers

  • F10020 FreedomEDGE® Syringe Infusion Pump with Travel Pouch
  • 347400 Replacement Travel Pouch

FreedomEDGE® Frequently Asked Questions (FAQs )

Write down the time the infusion started and verify that you are using the correct control rate tubing and syringe recommended by your healthcare provider. Then, watch that the syringe plunger moves in accordance with your infusion time. If you expect dose to take 1 hour, then after 15 minutes, 1/4 of your dose should be complete. If there is any doubt, please ask your healthcare provider.

Always refer to the medicine’s prescribing information and recommendations from your healthcare provider for infusion site locations. If you are experiencing slow infusions, you can time your infusions to see how well your body accepts the drug. Talk to your healthcare provider about switching infusion sites or adjusting your needles or tubing to better suit your needs.  For more details, please refer to the Instructions for Use.

Refer to the Instructions for Use for detailed instructions.

If a dose is larger than 30 mL, you can divide the dose into an additional syringe using the same tubing and needle set. Follow your healthcare provider’s protocol for swapping out the syringe. For smaller volumes, the FreedomEDGE® will adjust to whatever amount is contained in the syringe. You can also try our Freedom60® pump, which accommodates doses up to 60 mL.

The FreedomEDGE® Syringe Infusion System is indicated for the subcutaneous infusion of the following human plasma-derived immunoglobulins when used according to the FDA approved biologic labeling: Cuvitru®, Immune Globulin Infusion (Human) 20% (manufactured by Takeda®); Gammagard Liquid®, Immune Globulin Infusion (Human) 10% (manufactured by Takeda®); Hizentra®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by CSL Behring®) and Hizentra®, Immune Globulin Subcutaneous (Human) 20% Liquid (manufactured by CSL Behring®) Single-use pre-filled syringe for subcutaneous administration in the home, hospital, or ambulatory settings when administered according to the approved biologic or drug product labeling.

The FreedomEDGE® is also indicated for the subcutaneous infusion with EMPAVELI™ (pegcetacoplan) in the home, hospital, or ambulatory setting when administered according to the approved biologic or drug product labeling.

The FreedomEDGE® Syringe Driver and Precision Flow Rate Tubing is also indicated for the intravenous infusion of the following antibiotics when used according to the FDA approved drug product labeling: ertapenem, meropenem, oxacillin, and tobramycin.

Speak with your healthcare provider to learn more about all the Precision™ Flow Rate Tubing choices available, and to see if a change is appropriate.

The FreedomEDGE® is designed to operate without scheduled maintenance. If you ever experience a pump problem, immediately advise your healthcare provider who can arrange for a replacement if necessary.

Please contact the provider who sent you your pump.

icon-600x600-nurse

Get support from a nurse.

icon-600x600-training

Get the training that's needed.

icon-600x600-calculator

Calculate your infusion requirements.

Sign up for newsletter