High-Flo™ Needle Sets were designed with safety and comfort in mind. High-Flo™ needles are just one part of the Freedom™ Infusion System. When used along with Precision™ Flow Rate Tubing and the Freedom60®, or FreedomEDGE® infusion pump, positive patient outcomes are achievable
Wings designed to be flexible and allow each needle to stay in place
“Switching to High-Flo … cut 15 minutes off my infusion time. They come with genuine 3M Tegaderm so it doesn’t irritate my skin the way other dressings can.” Joanna uses only Precision Flow Rate Tubing on her Freedom60 pump, and says, “By adding High-Flo needles, I’m now able to achieve the best possible infusion from my Freedom60 pump.”
Joanna T.
Back Cut Needle Tip
Designed to minimize damage, scarring, and local site reactions.1
Flexible Flying Hinge
Wings designed to be flexible and allow each needle to stay in place
Safety Closure
Reduces the risk of accidental needle sticks.
Custom Luer
Designed to provide even flow to every site.
Set Options
Sets are available in 1 leg, 2 leg, 3 leg, 4 leg, 5 leg and 6 leg configurations.
Needle Lengths
Needles are available in 4mm, 6mm, 9mm, 12mm, and 14mm lengths.
Needle Gauges
Designed for subcutaneous flow rates with options in 26 and 24 gauge.
Tubing Length
Efficient and practical 20” length (in 26g sets) for fewer tangles and faster flow rates.
Extension Set
Available for those who prefer a longer length.
Y-Connector
Combines sets for more than 6 sites (up to 8), or to infuse with different length needles.
3M Tegaderm™
Transparent dressing is included with all sets.
RMS12406
20″ 1 Needle 24G 6MM (box of 20 pcs)
RMS12409
20″ 1 Needle 24G 9MM (box of 20 pcs)
RMS12412
20″ 1 Needle 24G 12MM (box of 20 pcs)
RMS12414
20″ 1 Needle 24G 14MM (box of 20 pcs)
RMS22406
20″ 2 Needle 24G 6MM (box of 10 pcs)
RMS22409
20″ 2 Needle 24G 9MM (box of 10 pcs)
RMS22412
20″ 2 Needle 24G 12MM (box of 10 pcs)
RMS22414
20″ 2 Needle 24G 14MM (box of 10 pcs)
RMS32406
20″ 3 Needle 24G 6MM (box of 10 pcs)
RMS32409
20″ 3 Needle 24G 9MM (box of 10 pcs)
RMS32412
20″ 3 Needle 24G 12MM (box of 10 pcs)
RMS32414
20″ 3 Needle 24G 14MM (box of 10 pcs)
RMS42406
20″ 4 Needle 24G 6MM (box of 10 pcs)
RMS42409
20″ 4 Needle 24G 9MM (box of 10 pcs)
RMS42412
20″ 4 Needle 24G 12MM (box of 10 pcs)
RMS12604
20″ 1 Needle 26G 4MM (box of 20 pcs)
RMS12606
20″ 1 Needle 26G 6MM (box of 20 pcs)
RMS12609
20″ 1 Needle 26G 9MM (box of 20 pcs)
RMS12612
20″ 1 Needle 26G 12MM (box of 20 pcs)
RMS12614
20″ 1 Needle 26G 14MM (box of 20 pcs)
RMS22604
20″ 2 Needle 26G 4MM (box of 10 pcs)
RMS22606
20″ 2 Needle 26G 6MM (box of 10 pcs)
RMS22609
20″ 2 Needle 26G 9MM (box of 10 pcs)
RMS22612
20″ 2 Needle 26G 12MM (box of 10 pcs)
RMS22614
20″ 2 Needle 26G 14MM (box of 10 pcs)
RMS32604
20″ 3 Needle 26G 4MM (box of 10 pcs)
RMS32606
20″ 3 Needle 26G 6MM (box of 10 pcs)
RMS32609
20″ 3 Needle 26G 9MM (box of 10 pcs)
RMS32612
20″ 3 Needle 26G 12MM (box of 10 pcs)
RMS32614
20″ 3 Needle 26G 14MM (box of 10 pcs)
RMS42604
20″ 4 Needle 26G 4MM (box of 10 pcs)
RMS42606
20″ 4 Needle 26G 6MM (box of 10 pcs)
RMS42609
20″ 4 Needle 26G 9MM (box of 10 pcs)
RMS42612
20″ 4 Needle 26G 12MM (box of 10 pcs)
RMS42614
20″ 4 Needle 26G 14MM (box of 10 pcs)
RMS52604
20″ 5 Needle 26G 4MM (box of 10 pcs)
RMS52606
20″ 5 Needle 26G 6MM (box of 10 pcs)
RMS52609
20″ 5 Needle 26G 9MM (box of 10 pcs)
RMS52612
20″ 5 Needle 26G 12MM (box of 10 pcs)
RMS52614
20″ 5 Needle 26G 14MM (box of 10 pcs)
RMS62604
20″ 6 Needle 26G 4MM (box of 10 pcs)
RMS62606
20″ 6 Needle 26G 6MM (box of 10 pcs)
RMS62609
20″ 6 Needle 26G 9MM (box of 10 pcs)
RMS62612
20″ 6 Needle 26G 12MM (box of 10 pcs)
RMS62614
20″ 6 Needle 26G 14MM (box of 10 pcs)
Made for sub-q, 26 gauge High-Flo™ (high-performance flow) sets offer faster infusion rates than typical 27-gauge needle sets. Note: If you are transitioning from 27 gauge, your provider might give you a different F-numbered Precision tubing set to keep your infusion time about the same.
Many patients tell us that they grab the wings above the needle, tightly pinch the skin at the site close together between their fingers and insert the needle straight into the pinched area with a dart-like motion. You may notice that the High-Flo™ butterfly wings are very flexible, making this procedure easy. It is recommended that each site should be about 2” apart and needles should be inserted at a 90° angle. Make sure any alcohol has evaporated off your sites, and insert all needles dry. Ask your healthcare provider for detailed information if you are experiencing discomfort.
3M Tegaderm™ is preferred by most patients, so it is included in with your needles. If you are a patient with dry or sensitive skin and find that the 3M Tegaderm™ is irritating, you may need to try different dressings, paper tape, or a cloth wrap. Ask your healthcare provider for suggestions.
We have needle lengths in 4mm, 6mm, 9mm, 12mm, and 14mm. We offer 1 leg, 2 leg, 3 leg, 4 leg, 5 leg and 6 leg configurations.
We have tested up to eight needles at one time using our Low Residual Y-Connector to join two quadfurcated sets. The prescribing information for your medication outlines the recommended maximum number of infusion sites. For details specific to your prescription, consult your healthcare provider.
The multi-leg High-Flo™ Subcutaneous Needle Sets are designed to provide an equal flow to each needle to reduce the risk of overinfusion at one site. However, flow rates can be affected by multiple factors unrelated to the needle set, such as placement over a scar or muscle or differences in subcutaneous tissue between different parts of the body. If you experience pain, leakage, or swelling at an infusion site, talk to your healthcare provider.
Discard your High-Flo™ needles in a sharps container as instructed by your healthcare provider. To learn more on how to properly dispose of used sharps, visit www.fda.gov/safesharpsdisposal
1. Duff C, Ochoa D, Riley P, Murphy E, Zampelli A. Importance of ancillary supplies for subcutaneous immunoglobulin infusion: management of the local infusion site. J Infus Nurs. 2013;36(6):384-390. doi:10.1097/ NAN.0000000000000009
KORU Medical Systems, Inc.
100 Corporate Drive
Mahwah, NJ 07430 USA
Tel: +1-800-624-9600
Fax: +1-845-469-5518
